3D Printed Bandsaw Upper Guide support bracket w/screws for 14" bandsaw.

Description

3D Printed bandsaw upper guide support bracket w/screws for 14" bandsaw. Condition is "New". These are custom designed and 3D printed to be used on the Central Machinery "Harbor Freight" 14" bandsaw. They are designed to use 1/2" square cooling blocks (not included). We created these to provide a cheaper alternative to others out there.
Please note that these are 3D printed so be careful tightening the bolts so you do not strip out the threads. These can easily be modified with a file or sandpaper to fit if they are slightly tight.
These should fit most 14" bandsaws that use these types of upper guides. If you use these on another brand bandsaw we would greatly appreciate it if you'll notify us so we can keep the list growing of what machines it will work on. Also, if you would like a set created for different size cooling blocks feel free to message us and we can design a custom set for you.
Disclaimer: You use these at your own risk. This is a 3D printed part and even though there should not be much stress applied to these there is always a risk of the parts breaking from misuse. We will not be held liable for any misuse on the consumer's part.