BENSHAW RX2E ENCLOSED COMBINATION SOFT STARTER 3PH, 480V RX2E-125-480-12KP

Description

NEW
BENSHAW RX2E ENCLOSED COMBINATION SOFT STARTER
MPN - RX2E-125-480-12-KP
MODEL - RX2E
V - 480
HP - 125
PH - 3
ENCLOSURE TYPE - NEMA 12
INPUT - 120V
SUITABLE FOR USE IN HAZARDOUS LOCATIONS
A LITTLE HISTORY
Curtiss-Wright
acquired Benshaw in 2007. The business has grown into a market leader in the design, development and manufacture of custom electronic motor control and protection product solutions. Key to its success was the development of a medium voltage variable frequency drive, which has earned a solid reputation for rugged, reliable performance in a variety of demanding applications.
Curtiss-Wright Corporation
sold its
Benshaw
business to
Regal-Beloit Corporation
for
million
in cash JULY 1, 2014..
PRODUCT DESCRIPTION
The
RX2E Enclosed Combination Soft Starter
is a rugged, simple to use soft starter with built-in motor protection, providing greater control in starting and stopping of three phase motors. RX2E Series soft starters comes standard with a circuit breaker, full voltage rated emergency bypass contactor, door mounted Start/Stop push buttons, Local/Off/Remote selector switch and door mounted MX2 keypad.
This RX2E Soft Starter is a NEMA 12 enclosure. The full voltage rated bypass contactor doubles as a running duty bypass contactor when in soft starter mode. Benshaw’s MX2 control technology (included with RX2E Series Enclosed Combination Soft Starters) provides basic motor protection with adjustable overload settings. MX2 control technology also provides user adjustable motor ramp profiles that can be tailored to the motor load, allowing for a smooth ramp of the motor, and adjustable voltage control deceleration suitable for pumping applications.
Benshaw’s RX2E Series Enclosed Combination Soft Starters can be programmed using a door mounted LCD keypad or Modbus register mapping.
MOTOR PROTECTION FEATURES
ANSI 19 – Reduced voltage start
ANSI 27 / 59 – Adjustable over/under voltage protection (Off or 1 to 40%, time 0.1 to 90 seconds in 0.1 second intervals, independent over and under voltage levels)
ANSI 37 – Undercurrent detection (Off or 5 to 100% and time 0.1 to 90.0 seconds in 0.1 second intervals)
ANSI 46 – Current imbalance detection (Off or 5 to 40%)
ANSI 47 – Phase rotation (selectable ABC, CBA, Insensitive, or Single Phase)
ANSI 48 – Adjustable up-to-speed / stall timer (1 to 900 seconds in 1 second intervals)
ANSI 50 – Instantaneous electronic overcurrent trip
ANSI 51 – Electronic motor overload (Off, class 1 to 40, separate starting and running curves available)
ANSI 51 – Overcurrent detection (Off or 50 to 800% and time 0.1 to 90.0 seconds in 0.1 second intervals)
ANSI 51G – Residual ground fault detection (Off or 5 to 100% of motor FLA)
ANSI 74 – Alarm relay output available
ANSI 81 – Over/under frequency
ANSI 86 – Overload lockout
Single phase protection
Shorted SCR detection
Mechanical jam
PAYMENT POLICY
We gladly accept all eBay approved forms of payment. Payment is required within 24 hours of purchase unless approved for time extension.
SHIPPING POLICY
All items are
personally
packaged, weighed, and measured . Local pick up items can be shipped via freight if the customer request and assumes all cost . We do our best to use the least expensive / fastest option to ship your item even when we pay for the shipping. Most of the time, items are shipped the same day they are purchased excluding weekends and holidays. All items are given tracking numbers that you are able to access from My eBay. You just have to scroll to your purchase. If you have any questions or issues please contact us ASAP and we will do all that we can to help.
RETURN POLICY
We accept returns
for refund or exchange (inventory permitting) within 30 days of original purchase and is still in the same condition we shipped it out in.
Please contact us through the eBay messaging system to request return authorization for your order. Please include your ebay user ID in your email for reference. After 30 days you can use your manufactures warranty if one is included with the product purchased. All returns are
subject to a 20% restocking fee depending on the reason for returning, Return shipping cost will be assumed by the buyer unless purchased in error, due to a mistake in our listing
.
Hutchison Industrial Services will assume return shipping cost for all defective products and exchange shipping cost to the buyer.
ITEM IS FOR LOCAL PICKUP ONLY.