Elimia Combination Motor Starter CMS 9-13-480N4X-DOL 7.5HP 480V Nema 4X UL508A

Description

Please contact us if you have any questions. We want you to get the right equipment - 1-855-4Elimia.
This is for a new enclosed magnetic motor starter with disconnect and circuit breaker designed to start, stop and protect machines.  Designed with momentary type switches and pre-wired latch that breaks circuit during overload or loss of main power.  Also includes NEMA 4X rotary motor disconnect, to meet NEC requirements with lock out tag out capability.
Pre-wired for easy installation.  Arrives as seen with all interconnecting wiring complete.
Be sure to review the spec sheet pictures for additional details and ratings.
Available in 230V up to 50HP and 480V up to 100HP.
All units are certified UL508A, industrial control panels.
NOTE: photos may be of similar model, please review specs using the model number of this listing.
Specifications for this unit:
-
Part Number CMS 9-13-480N4X-DOL
-UL508A certified industrial control panel
-7.5 HP @ 460-480V 3ph
-Supply Voltage 460-480V 3 phase only.  Contact us for 1 phase configurations.
-Motor starter with 9-13 Amp overload Nema Size 1 contactor
-40A main disconnect with lock out tag out handle on door
-Separate start and stop push button switches with A600 contacts.
-All components mounted to a removable back panel and pre-wired
-Warning label and identifying label
-Many options available
Great price!
Control voltage is
460-480VAC
and is pre-wired. (Note: the power source for the control wiring of this starter is pre-wired and sourced from your feeder wiring directly on the line side of the starter.  You will not need to pull in a separate power source for the controls).
The control voltage is the voltage used to activate the coil of the contactor. In the simplest install you will want a coil voltage the same as your power supply. But is some cases you might want the control voltage to be different for a host of reasons.
All components used in our assemblies are UL Certified.
The overload will have an adjustable Amperage range. Your overload choice is based on your machines FLA. If your machine motor has a FLA of 10 Amps at your supply voltage then you should choose the overload where 10 Amp falls within the adjustable range. For a 10 Amp FLA we would recommend overload 9 - 13 Amps.
Our overloads can be set for manual or automatic reset operation. The overload control is pre-wired by Elimia in a way that trips the starter. This is done to protect your equipment and is one of the main purposes of a motor starter.
Components mounted on a easy to remove back plate.
This assembly comes with a premium enclosure with hinge door.
Enclosure is NEMA 4X (also rated Nema 1, 2, 3R, 4, 5, 12, 13, 6, 6p) made in USA. Provides protection from water/dust/oil. UL listed to 600V.  This enclosure does not provide knockouts for wiring.
We can build any panel to your specs and at very reasonable price and turn-around.
90 day replacement Elimia warranty.
Elimia has assembled and supplied thousands of starters to customers all over the world. In addition to our standard products we design and built custom control panels and packaged drives. Our customers come back again and again for the value products we offer.
Guarantee: Satisfaction Guaranteed! If you are not happy with your purchase within two weeks of arrival you can return it. No restocking fee! Offer excludes shipping and eBay fees. If the item has been installed and it turns out not be what you needed please call us. We will work with each customer and try to reach a resolution.
Please note: All items should be professionally inspected and tested prior to installation or use. We are not liable for damages, injuries or death relating to our products.
Feedback: Once you are satisfied with your purchase please leave us feedback. If you have any problem with the transaction or product, please contact us.
Powered by
eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.