Genmitsu CNC Dust Shoe for 42mm Spindle 3018 Series CNC Router Machines

Description

Genmitsu CNC Dust Shoe for 42mm Spindle 3018 Series CNC Router Machines
Please check the below " Delivery Details" carefully before you purchase. If you have any problem, please contact us via eBay message.
Description:
Compatible with most 3018 series CNC machines on the market, including 3018-PRO, 3018-PROVer, 3018-PROVer Mach3 and 3018-MX3. Just make sure that your spindle diameter is 42mm (1.65″) and with two 4mm (0.16”) screw holes.
This dust shoe is made of high-quality transparent ABS . The transparent design helps you keep an eye on your operations. Equipped with a 40mm long nylon brush to maximize vacuum suction and help act as a dust sweep with high dust removal efficiency. Keep your machine and work area clean while cutting, drilling, and carving.
Two-Piece Magnetic Design: Durable, light and flexible, convenient for daily use and maintenance. Easy to assemble and install. Only take 3 steps to finish the installation.
The split design makes it much easier to replace bits. You only need to pop off the bottom cover when replacing your bits, no tools required , and avoid other complicated procedures.
The planting brush is much tidy and firmer than other glued ones. You could just replace the whole bottom cover when the brush is worn. Don’t need to spend much time removing and adding a new brush (If the brush is too long for your bits, we suggest that you could trim it off from the bottom according to the bits length or order a Replacement Base Bottom Cover with 20mm long nylon brush).
Specifications:
Weight: 86g (0.18lb)
Vacuum Port Outer Diameter: 38mm/ 1.5”
Vacuum Port Inner Diameter: 32mm/1.26”
Compatible Machine: Genmitsu 3018-PRO, 3018-PROVer, 3018-MX3, 3018-PROVer Mach3, 1810-PRO and other generic 3018-PRO CNC Machines
Note: Ideally the tip of the bit should be mounted to be level with the bottom of the bristles when they are refitted. If the bristles is too long for your bits, we suggest that you could trim it off from the bottom according to the bits length, otherwise the bristles will be compressed against the top of the stock as it starts a cut.
Package List
1 x Dust Shoe
2 x Screws (M4 x 8)
1 x Wrench
1 x Manual
Enjoy a cleaner work area with our Genmitsu CNC Dust Shoe. This dust shoe is designed to be a high performing economical option for CNC routing.
Made of high-quality transparent ABS. The transparent and split design helps you keep an eye on your operations and replace the bits easier.
The planting 40mm long nylon brush is much tidy and firmer than other glued ones, it could maximize vacuum suction and help act as a dust sweep with high dust removal efficiency.
Easy Installation
Install the Top Cover of the dust shoe on the spindle with 2 pieces of M4x8 screws.
Align the magnets on the top of the Central Chamber with the magnets on the Top Cover. Then the Central Chamber will be attached to the Top Cover of the dust shoe.
Align the magnets on the Bottom Cover with the magnets in the Central Chamber. Then the Bottom Cover will be attached to the Central Chamber of the dust shoe.
Insert the vacuum cleaner tube with 32mm outer diameter into the tube connection of the dust shoe Top Cover
Payment
Delivery
details
Guarantee
Feedback
We accept payment via PAYPAL ONLY which provides full-scale buyer protection policy up to 00. We only ship to confirmed PAYPAL addresses.Please make sure payment address in PayPal is correct.
All major credit cards are accepted through our secure payment processor via PayPal.
Payment must be received within 7 business days of auction closing.
1. Item will be shipped within
1 working day
after full payment is received. Tracking No. will be sent to all customers upon package shipment.
2. For Domestic shipping, our Shipping Method refers to
Sta
ndard Shipping(2-4)
business days(weekends excluded).
Please check the 'Estimated Delivery' to know item delivery time.
3. Delivery time depends on destination, logistics mode and other factors. If you have not received your shipment within 30 days, please contact us. We will track the shipment and get back to you as soon as possible.
Customer's satisfaction is our goal
.
4. Just kindly reminding that according to eBay policy, we will not cover the Customs duty and VAT fee. (No such issues for USA)
5.
To guests: Before buying, please understand the customs clearance, if it is required to provide communication license or settlement related taxes and fees.
12 months Manufacturer's Warranty.
We guarantee 100% customer satisfaction. If your item is not as described or faulty when you receive we will replace or refund to you according to the actual situation occurred.
If you are satisfied with our service, please kindly leave us a positive feedback and give us the Detailed Seller Rating with a "5 stars". 1, 2, 3 or 4-star Detailed Seller Ratings are equal to negative feedback.
Please leave feedback if you are satisfied. Please contact us for resolutions before leaving neutral or negative feedback, we strive to providing the greatest service and bringing the highest satisfaction to all of our customers.
We strive to answer all emails as quickly as possible, but due to high email volume it may take time for us to reply. Thanks in advance for your patience!
Contact Us:
If you have the following issues,
please contact us to get your problems solved:
1.
Item Not Received
2.
Item Not As Description
3.
I Need to Return My Item
4.
Pre-sale Inquiry
5.Others