Genmitsu CNC MDF Spoilboard for 3018 CNC Routers, CNC Accessories 30 x 18 x 1...

Description

Genmitsu CNC MDF Spoilboard for 3018 CNC Routers, CNC Accessories 30 x 18 x 1.2cm (11-4/5''x 7''x 1/2''), M6 Holes (6mm)
Product Details
Manufacturer: ‎Genmitsu
Part Number: ‎SP3018
Item Weight: ‎1.15 pounds
Package Dimensions: ‎12.4 x 8.23 x 0.87 inches
Material: ‎Wood
Item Package Quantity: ‎1
Batteries Included?: ‎No
Batteries Required?: ‎No
Date First Available: October 19, 2020
A spoilboard is a disposable workbench mounted above the router's table. It can protect the router table from damage as well as being an expendable surface that can participate in workholding.
Material: MDF (Medium-Density Fibreboard). MDF is very dense translating into more weight with enhanced strength and durability. Size is 30 x 18 x 1.2cm (11-4/5''x 7''x 1/2'')
Compatibility: Perfectly compatible with ALL 3018 series CNC router kit.
Application: Usually used when cutting or carving wooden materials. The MDF spoilboard is used as a base to cut on so that your CNC table is not damaged by the cutting tools. It can ensure the stability of the cutting material, thereby achieving more precise cutting
Read more Genmitsu MDF Spoilboard for 3018 Precautions Make sure the MDF spoilboard is secured well to the machine bed.Make sure the CNC material is clamped tight to the MDF spoilboard / machine bed, or you will get vibration, chatter, poor cut finish, and can possibly break your cutting bit.Do not use any lubricant when you use an MDF spoilboard. It will swell and expand if it gets wet. So using spray or mist coolant or oils is not recommended. Why Choose Genmitsu High quality, high precision products Always professional technical support Full collection of CNC accessories, always design to suit your need Read more Installation Guide Preparing your Spoilboard When your spoilboard arrives, it should come with everything you need to be installed. In order to check, please compare the bottom of your spoilboard to the one shown above. Assuming that your spoilboard looks like the above, you will want to partially unscrew the 6 T nuts shown above so that there will be some room for them to shift properly as you tighten them during installation. Installation Next, you will want to align the T Nuts so that they will be able to fit into the slots on your CNC bed. It is best to do so while the board is oriented for installation. Please see image 2 for what will fit (circled in green) versus what orientations will not fit (circled in red).With the spoilboard in place, tighten the hex screws as far as they will go without over-tightening. As you do so, each T nut will rotate and clamp into place, securing your spoilboard to the CNC bed. Enjoy Making Once you have done so, try lifting your spoilboard at each corner to make sure that all T slot nuts have properly anchored to the bed.The spoilboard has been successfully installed, now you can enjoy making! Read more Genmitsu 3018-PRO Genmitsu 3018-PROVer Genmitsu 3018-MX3 Genmitsu 3018-PROVer Mach3 KABA Lite CNC Enclosure 4pcs ER11-A Collet Clamping Nut Genmitsu EVA CNC Milling Bit Storage Tray 7Pcs ER11 Spring Collet Set Genmitsu 3018 Y-Axis Extension Kit 10pcs V-Groove CNC Router Bits What's this for For 3018 series CNC routers, Dustproof, noise reduction Having a few spare for different size collets makes tool changes easy Helps you group your bits, little gadgets and tools in order Perfect for CNC milling lathe tool and work-holding engraving machine Extend your 3018 to a 3040 Sharp, fine point tip with a 0.1mm cutting diameter in three different cutting angles (30/60/90degree)