Mini Din 10-Pin M/F Extension Cable (Razer Nommo Pro compatible) 6.5 ft

Description

There are many different 10-Pin connectors out there. Please be sure before buying. These are
MINI DIN 10-PIN
extension cables. Please check the image for the pin pattern & confirm for your use case.
One cable measures 2 Meters (approximately 6.56' Feet). An extra half foot per cable.
One confirmed use for this cable is as a speaker extension cable for the
Razer Nommo
Pro
speaker system. If that is your use case, please be aware that this 10-Pin cable will not work with the Razer Nommo standard/regular/Chroma speaker system, which uses a 9-Pin cable. The 10-Pin configuration will only work with the
PRO
version of these speakers.
Two extensions for 1 speaker has also been confirmed to work if necessary for larger setups, in the event that 6.5 ft is not enough. A single 6.5 ft extension is enough for most L-shaped computer desks, if the subwoofer is under the corner of the desk and not centered infront of you. Additional cables to increase the overall length is recommended for standing desks also using cable raceways for cable management. Should you ever change your setup to something smaller in the future, you could always remove a cable and have less to hide and less cable clogging-up your cable management raceways. The cable width is reduced for further space-saving in cable raceways and other cable management channels, sleeves, etc.
The male and female end colors differ due to a shortage in manufacturing materials and to expedite production. The male end was upgraded to gold-plated. This difference does not affect quality, or function.
Cables need only be pressed firmly into the back of the Razer Nommo Pro subwoofer. No modifications required.