MunkyMods EVGA DG-8 (86/87) Basement Cover (for use WITH lighted EVGA panel)

Description

MunkyMods Custom Basement Cover for the EVGA DG-8 (DG-86/87) Case.
There are Two (2) Versions of this MunkyMods EVGA DG-8 Basement Cover.
One for use WITH the factory lighted EVGA panel, and the other for use WITHOUT the panel.
This eBay Item is the Basement Cover for use WITH the lighted EVGA panel.
For the Basement Cover for use WITHOUT the lighted EVGA panel, see our other eBay item.
It is available in Black, White, Clear, Light Smoke and Dark Smoke material.
The pictures are shown with the protective paper in place (brown) which should be removed before installation.
You can also paint (or Plastidip) the Basement Cover to match your build.
If you order the Clear panel, you can paint the back (or bottom side) to get a glossy finish in any color you choose to paint it.
We offer the MunkyMods Basement Cover with or without a GPU Wire Pass-Thru Hole.
Choose from three GPU Wire Pass-Thru Hole locations (7.0", 9.5" and 10.5") for different length GPUs.
Just measure your GPU(s) from the rear mounting plate (where the video output connectors are) to the middle of your power plug(s). See Pictures.
Installation: The panel rests on top of the drive cages and requires a support added to the left front corner.
The support is affixed to the bottom edge of the front door opening lip.
NOTE: This basement cover will fit the DG-84/85, but, will have no place to rest (No HDD Cages).
You would have to make your own mounting system, to hold the Basement Cover up.