-40%
SuperCut B56.875W38R24 Three Wheeler Bandsaw Blades 56-7/8

SuperCut B56.875W38R24 Three Wheeler Bandsaw Blades 56-7/8" Long 3/8" Width, 24R

$ 6

Availability: 60 in stock
  • Refund will be given as: Money back or replacement (buyer's choice)
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Seller
  • Model: B56.875W38R24
  • Country/Region of Manufacture: United States
  • Brand: SuperCut
  • Item must be returned within: 30 Days
  • Condition: New
  • MPN: B56.875W38R24
  • California Prop 65 Warning: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.

    Description

    For 2 and 3 Wheel Tabletop Band Saws; 3/8" Width; 24 Raker Tooth; 0.014" Thickness
    The Three Wheeler bandsaw blade is a special blade for 2 or 3 wheel tabletop bandsaw.
    Blade breakage and poor blade performance are common problems with these small saws.
    These problems are caused by the extreme flexing of the blade caused by the small size of the wheels that the blade runs on and the high speeds normally used.
    The Three Wheeler blade is made of special Carbon Tool Steel with Carbon Tool Steel precision heat-treated teeth that is thinner (.014") in order to enable it to withstand sharp flexing and high speeds.
    There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 56-7/8 inch ( 4 ft. 8-7/8 inch, 4' 8-7/8" ) bandsaw blades suit the following models: 10" Craftsman V.S. 24453 & Single Speed 24460, Shopcraft and Duracraft VS312 & BBS412.
    If in doubt, to determine bandsaw blade length: 1 - Check the owner's manual of your bandsaw machine for specifications - not only the length, but also the range of the width and thickness.2 - If the owner's manual is not available, refer to previous invoices.3 - Cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. This method will provide the most possible accurate length.4 - Upon requested, Magnate makes blades of any length and types to fit your brand and model.