USB 3.0 PCI-E Express 1X to 16X Extender Riser Card Adapter SATA Power Cable Red

Description

Home
Arduino
Module
Sensor
Chips
About Us
Description:
Feratures：
Brand new and high quality
Safer, more efficient, more practical
With SATA 15PIN to enhance power supply, the graphics card power supply independent from the motherboard,
Which to reduce the burden on the motherboard when connect multi-graphics card
Graphics card power supply with four solid capacitors, graphics card power supply more stable and secure.
Solve the problem that welding point fragile burn, transmission signal attenuation, platoon line length is not enough and so on
Slots with fixed card buckle, remove the graphics card and the fixed graphics, the graphics card will not fall off from the slot
PCI-E connector with multi-layer shielded wire, the longest can connect 3 Meters the signal will not attenuate
Specifications：
1.Power Connector: Sata 15 pin
2.The board size：12.2cm*4.2cm
3.USB Cable Length: 60cm
4.Compatible use: with any graphics cards
Note：
1. This extension is applicable to the mainboard PCI - E slot (1 x 2 x, 4 x 8 x 16 x). Please plug in the power cord for the floppy.
2. When plug PCI - E extension must be computer broken wires plug again.
3. The form a complete set of wire rod is customized, never grab line to plug in. Remember that!
4. When plug wire must identify the direction, not to counter or offset, prevent burning equipment, plug wire when the socket of equipment first,then plug wire, avoid too hard plug socket pin is broken.
5. Dual-core graphics Suggestions with the old line, the mainboard is 16 x also recommends using the old row line!
Package included：
1x PCI-E 16X adapter
1x PCI-E 1X riser board
1x USB3.0 cable
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
Fill your shipping info
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.